ALTO PRO MIXPACK Express ULTRA-PORTABLE POWERED PA SYSTEM (Free Shipping)

ALTO PRO MIXPACK Express ULTRA-PORTABLE POWERED PA SYSTEM
Manufacturer: ALTO PRO
Condition: New
Item #: MPE350X110
Regular price: $699.00
Sale price: $499.00
  • Free Shipping
  • Product Description

     

    Ultra-Portable Clean Power With Effects and EQ

    The 350 Watt MIXPACK Express is one of three PA systems in the MIXPACK line, along with the 600 Watt MIXPACK and 1000 Watt MIXPACK Pro. Being the lightest and most portable of all MIXPACK PAs has its advantages. There simply isn't an easier, more affordable way to get this much clean power, mixing and Alesis DSP effects in one place. It takes only a few minutes from the time you bring MIXPACK Express into the venue, to the time the gig powers on, and power on it will. 

    MIXPACK Express comes complete with two 10" speakers and 350 watts of continuous power. All the right connections are present including balanced XLR, balanced/unbalanced TRS and unbalanced RCA so no matter what you need to connect, you're all set. MIXPACK Express also includes two speaker cables in the package so you can get set up in no time. The speakers attach and detach to the amp/mixer module using firm, rugged latches and the entire kit can be carried in one hand thanks to a convenient, molded handle on top.

    The built-in mixer on MIXPACK Express has five input channels with 16 Alesis DSP presets with 24-bit effects for Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations. Fine tune the performance with the integrated 7-band graphic EQ and monitor all of it with the built-in LED and Monitor Out jack.

    If you need a solid PA system that is loaded with features and easy to transport, grab a MIXPACK Express. If you need a little more power, check out the MIXPACK and MIXPACK Pro, also from Alto Professional.

    Features
    • 350 Watts of continuous power
    • Lightweight, one-piece design for convenient transport
    • Two 10” speakers with cables included
    • Built-in mixer with seven-band graphic EQ and XLR, line and RCA inputs
    • Integrated Alesis DSP with 24-bit effects including reverb, delay and chorus
    TECH INFORMATION

    Mixer Section
    Microphone/Line Input: Electronically balanced, discrele input configuration
    Frequency Response: 10 Hz to 55 kHz, +/-3 dBu
    Microphone Input Impedance: 3.9 kΩ
    Line Input Impedance: 10kΩ
    Microphone Input S/N ratio:  >94 dBu
    Microphone Inputs:  Balanced XLR connectors 
    Line Inputs: Balanced / Unbalanced, 1/4' (6.3 mm) TRS jack connectors
    Tape Inputs: Unbalanced RCA jack
    Inputs Distortion (THD & N): 0.04% at 0 dBu, 1 kHz
    Channel EQ High shelving: +/-15 dB @ 12 kHz  Low shelving  +/-15 dB @ 80 Hz                                        
    Aux Send: 1 with paths for DSP internal section, external DSP section and Monitor Out
    DSP Section: 24-bit Hall, Room, Vocal, Plate, Stereo Delay, Reverb + Delay and Reverb + Chorus combinations
    Master Section: Master Level knob, 4 LEDs level meter, 7-band graphic output EQ, and DSP Return level 
    Output Master EQ: 7-band, +/-5 dB @ 63Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.3 kHz, 16 kHz
    Monitor Section: Master Level knob, 4 LEDs level meter, and 1/4" (6.3 mm) Monitor Out jack 

    Speaker Section
    System Type 2-way coax vented box
    Frequency Response 65 Hz - 20 kHz at -10 dB
    Spherical horn Coverage 70° H × 70° V
    Continuous Power 150 Watts AES Standard
    Peak Power 300 Watts Peak
    Protection Electronic circuit on driver
    Speaker Specification 10" (254 mm) Low Frequency Driver /  2" (50.8 mm) Voice Coil, 1" (25.4 mm) Neodymium High
    Input Connectors 1/4" (6.3 mm) mono (TS) jack on each cabinet

    Amplifier Section
    Output Power 350 Watts (EIAJ)  
    Impedance
    Protections Overload / Short Circuit / Soft Clip Limiter / Thermal Protection Fan Cooling

    Standard Package
    Two speaker cables
    Power cord
    One microphone cable
    Stands: F-8 or F-3 not included