JBL CONTROL 50S/T-WH CONTROL 50CS/T SUBWOOFER WHITE (Free Shipping)

JBL CONTROL 50S/T-WH CONTROL 50CS/T SUBWOOFER WHITE
Manufacturer: JBL
Condition: New
Item #: CONTROL-50S-T-WH
Regular price: $394.00
Sale price: $315.00
  • Free Shipping
  • Product Description

    Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.

    FEATURES
  • Full bandwidth 32 Hz – 20 kHz high fidelity sound
  • Selectable 70V/100V for distributed lines, or low impedance
  • Versatility for either two or four satellite speakers per system
  • Available in black or white

    SPECIFICATIONS
  • Frequency Range (-10 dB) 32 Hz – 200 Hz
  • Frequency Response (±3 dB) 50 Hz – 150 Hz
  • Power Capacity 300 Watts Continuous Program Power (2 hrs) 150 Watts Continuous Pink Noise (2 hrs) 200 Watts Continuous Program Power (100 hrs) 100 Watts Continuous Pink Noise (100 hrs)
  • Nominal Sensitivity (2.83V, 1m) 95 dB (near corner), 89 dB (center of wall)
  • Rated Maximum SPL (1m) 115 dB average, 121 dB peak (near corner) 109 dB average, 115 dB peak (center of wall)
  • Nominal Impedance 8 ohms (in bypass/thru mode)
  • Transformer Taps 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
  • Transducer Driver 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
  • Input Connectors Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)
  • Material Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc plated metal.
  • Dimensions (H x W x D) Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in) Wall Bracket: 15 mm (0.6 in) deep
  • Wall Bracket 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
  • Net Weight 9.0 kg (20 lbs)
  • Shipping Weight 10.2 kg (23 lbs)
  • Included Accessories Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors, M6 screw for safety lanyard attachment.