Powered 10 in. Integrated Loudspeaker System
The VP7210/95DP is a powered 10" 2-way integrated loudspeaker system featuring 1750 watts of peak output power, and onboard digital signal processing.Compact Powered bi-amplified full-range loudspeaker with JBL DrivePack® technology for portable
or installed use.
Optimized for both portable/rental or permanent-venue use.
1750 watts peak output power, 875 watts continuous.
10-inch Differential Drive® low-frequency driver for extended lowfrequency output.
Robust powder-coated die cast aluminum handles, designed for strength and comfort.
Frequency Response 80 Hz – 20 kHz ( ± 3 dB)
Frequency Range 50 Hz – 20 kHz (-10 dB)
Coverage Pattern 90° x 50°
Directivity Factor (Q) 10
Directivity Index (DI) 10 dB
Maximum Peak Output 132 dB SPL 1m
Low Frequency Section JBL 2261FF, 254 mm (10 in) dia., 76 mm (3 in) Dual Coil neodymium Differential Drive®, Direct Cooled
Bandpass Nominal Impedance 2 x 2 ohms
High Frequency JBL2452H-SL, 100 mm (4 in) titanium damped diaphragm, 1.5 in. exit.
Bandpass Nominal Impedance 8 ohms
DP2 Internal Amplification Output (at nominal load) 1750 Watts Peak, 875 Watts Continuous
DP2 Output (Continuous IEC shaped pink noise into rated load impedance) 750LF/125HF Watts
DPC-2 Output Section LF: Dual Bridged Technology™, Class D HF: Bridged Class D
Audio Input connector XLR with loop-through
User Controls 80 Hz Subwoofer High Pass Filter. Enable/Disable 0-16 dB input Attenuator with 32 precision 0.5 dB steps
Signal Processing DSP Based, resident in Input Module
System Management DSP based limiters for mechanical and thermal protection
AC Power Operating Range 90-132 VAC/216-264 VAC, 50/60 Hz
AC Line Voltage 50/60 Hz; User Selectable; 120V/240V (-15%, +10%)
AC Input Connector Neutrik PowerCon (NAC 3MPA)
AC Loop-thru Neutrik PowerCon (NAC 3MPB)
AC Current Requirement 6A per system at 120V, 3A per system at 240V
Box Construction 5/8in multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlex™ finish.
Suspension System 10 M10 Fittings
Grille 14 Gauge Black powder-coated perforated steel with foam backing
Dimensions (H x W x D) 521 x 293 x 303 mm 20.5 x 11.5 x 11.9 in
Net Weight 18.4 kg (40.5 lbs)