2 - MARATHON DJ-1502 SPEAKER
1 - MARATHON DJ-2000 AMPLIFIER
2 - 1625B 25FT BAN-1/4 CABLES
DJ-1502 Two Way Single 15" Woofer, 14" x 6.5" Horn
Power handling: 400 Watts Peak
Impedance: 8 ohms
Frequency Response: 40hz - 20khz
Dual 1/4 Input, High quality carpet
Recessed handles, metal grill, metal corners
Dimensions: 15" x 18" x 28", 45 lbs.
DJ-2000 Power Amplifier
Input Gain (dB)
These controls are used to adjust the input gain of each channel. They determine
how loud each channel of the power amplifier will sound for a given input signal
Power LEDS (Power)
These indicators illuminate when the AC main power is being supplied to the amp
and both channels are operational. If either channel experiences fault
conditions, exceeds safe operating temperature limits, or if the mains circuit
breaker trips, both channel power LEDs will be dark, indicating shutdown.
Signal Activity (Signal)
These indicators illuminate when the associated channel output signal level
exceeds 1 V RMS.
Overload LEDs (Clip)
These indicators illuminate when the associated channel has been overloaded.
Fault LEDs (Fault)
These indicators illuminate when the amplifier just turned on or if the
amplifier is detected some problem inside such as overheat or circuit problem so
that can protect the amplifier.
This heavy-duty, rocker type switch turns on the mains power to the amplifier.
When the mains power is applied there is a 3-second delay in activation of the
Channel 1 and Channel 2 level LED indicator
Cannon and input jack connector provide balance or unblance input mode.
This switch is used to select STEREO or BRIDGE mode operation.
Binding Post Outputs
Shockproof binding post are provided. For each channel the outputs are in
parallel and the speaker connection cables can be terminated with banana plugs
or stripped wires.
The amplifier provide three 4 conductor Speakon connectors, one for each channel
and one for bridge mode
Switch to choose 110V-120V or 220V-240V power supply.
This is the standard IEC power connector. An AC mains cord having the
appropriate AC plug and rating for the intended operating voltage is included in
Two 2 speed DC fans supplies cool air to the amplifier. Fan switches to high
speed automatically when the unit requires additional cooling.
General harmonic wave distortion: 0.1%, Frequency response: 20Hz - 20kHz, Rising
Speed: 45v/us (BTL - MONO 90v/us), Input impedance: 20K Ohm S/N ratio: 95dB
8 Ohm power - 2 x 200 Watt
4 Ohm power - 2 x 400 Watt