Four-Deck DJ controller with Built-in DJ mixer
Integrated DJ mixer allows you to connect two external sources plus two microphones
Built-in Professional USB audio interface with balanced XLR outputs
Large Sensitive Control Wheels
High-Resolution MIDI, provides ultra-tight control and response
Four-deck version of VirtualDJ 7 LE Compatible
Mixer section with EQ, loop and effects controls
1. Master - Control the volume of the master output.
2. Booth - Control the volume of the booth output.
4. Load - Load a track to a specific channel.
5. Back - Press it back to browse other folders. In
folder structure panel, press a folder with sub-folders to expand or collapse.
Search: Hold it and dial
the jog wheel to search a start point of a track you would like to play from.
Compound Function: Hold it to enable the
buttons with the second mapping to activate the compound function.
When pressing with Shift, it enables to change among different pitch ranges.
Rec: Press it with Shift to activate Smart Cue function.
Press it with Shift to activate Smart Loop function.
Out: Press it with Shift to activate Reloop playback.
Press 1~4 to switch among different control panels.
1~ Cue 4: Press one of these four buttons to toggle respective 1/8 ~ 1 beat
length for the beat loop playback.
7. Gain and EQ
Gain: Adjust the input signal
Hi: Adjust the input tremble
Mid: Adjust the input midrange
Low: Adjust the input bass
8. Filter - Turn it to adjust high pass and low pass
ratio of Filter sound effect.
9. Cue - Press it to monitor its belonging channel.
10. Fader Assign - Press L or R to assign a channel
to the left side or the right side of the crossfader.
11. Line Fader - Use it
to adjust the sound level.
12. Crossfader - Use it to
switch or mix between the playing tracks.
Parameter: Turn to
adjust the parameter of a sound effect.
Select: Choose a
On/Off: Switch on or
off the sound effect.
Key - Adjust the
key of the playing track without changing its tempo.
Volume: Adjust the volume of a sample
Select: Choose a certain sample.
On/Off: Toggle on or off a sample
Hot Cue & Beat Loop
Beat Loop: Press it
to switch between Beat Loop or Hot Cue mode.
In Hot Cue
mode, set a cue point to one of four buttons for instant Hot Cue play.
In Beat Loop
mode, these buttons represent the different beat length for instant trigger
Beat Loop playback.
17. Seamless Loop
a.Press IN and then press OUT to form a loop
b.Press /2 or X2 to shift between a beat value
for Auto Loop. Press OUT to toggle Auto Loop playback.
c.When a loop playback is activated, press /2 or
X2 to trim the loop length.
18. Deck Switch - When this button is illuminated,
it means the deck control is switched from Deck 1 to Deck 3 or Deck 2 to Deck 4.
19. Pitch Fader - Use it to adjust the pitch up or
down to match the beat with the other channel.
20. Key - Press it to switch KEY mode on or off. If
it is ON, the unit maintains at a constant tempo and doesnít change while the
pitch slider is moving.
21. Scratch - Press this button to activate the
touch sensitive jog wheel to allow touch scratch.
22. Play/ Pause - Press this button to start the
playback or let the playback pause.
23. Cue - In pause mode, press this button to set a
memorized point for instant play; in play mode, press this button to pause the
music and return to the memorized point.
Holding down this button will
start the playback from the cue point. Releasing it will pause the track and
return to the cue point.
24. SYNC - Press it to immediately synchronize with
the BPM of the other channel.
25. Jog Wheel
26. Headphone - Connect a headphone with a 6.3mm
plug into the jack. Turn Volume knob to adjust the output level and turn Cue/Mix
knob to adjust the ratio between master output and cue channel.
27. MIC Input - Connect a microphone with a 6.3mm
plug into the jack. Turn the knob to control the volume.
28. Audio Thru - Use it to switch on/off AUX IN of
CH3 and CH4. This function is only available in Virtual DJ PRO 7.
29. Touch Sensitive Level - This is used only when
adjusting the proper touch sensitivity level of the jog wheel for Scratch. When
you find the touch sensitivity you prefer, this is not necessary to be adjusted
30. Fader Curve - Use it to switch between two fader
Input Level - Use this knob to adjust
the proper input volume to prevent distortion.
Line/ Phono - Use these two sets of
jacks to connect to CD players or turntables.
Master Output - One set is balanced
XLR and the other set is RCA socket. They are used to connect to a main speaker.
Booth - Use this set of jack to
connect with a monitor speaker.
USB Connector - Use it to connect with
a computer by a USB cable.
Power Input - This product requires a
power adaptor to get sufficient power supply.
Frequency 44.1 KHz, Audio Resolution : 16 bit
Output level: 1.2V+-0.2V
THD+N: < 0.03%
S/N: > 80dB
Crosstalk: > 80dB