Martin RUSH FiberSource 1 (Free Shipping)

Martin RUSH FiberSource 1
Manufacturer: Martin
Condition: New
Item #: 90280070
Regular price: $750.00
Sale price: $750.00
  • Free Shipping
  • Product Description

    Martin RUSH FiberSource 1
     

    A highly anticipated update to the FiberSource QFX 150, the new RUSH FiberSource 1 is a powerful tool for illuminating fiber optic cables in permanent installations. With a new 78 W LED fiber projector, the RUSH FiberSource 1 boasts improved efficiency and reliability while retaining all the key features of its predecessor, such as nine interchangeable colors, a twinkle effects wheel, electronic dimming and DMX/stand-alone control.

    • 78 W LED fiber projector
    • 9 interchangeable colors
    • 0-100% electronic intensity control
    Features
    • 78 W LED fiber projector
    • 9 interchangeable colors
    • 0-100% electronic intensity control
    • Twinkle effect wheel
    • DMX or stand-alone control
    • Up to 300 fiber cables (1 mm)
    Tech Specs
    Physical
    Length: 305 mm (12.0 in.) Width: 210 mm (8.3 in.) Height: 200 mm (7.9 in.) Weight: 7.6 kg (16.8 lbs.)
    Dynamic Effects
    Color wheel: 9 interchangeable filters + open, indexing, continuous rotation Twinkle effect: Continuous rotation, variable speed and direction Dimmer: 0 - 100% continuous dimming
    Control and Programming
    Control options: DMX, standalone, master/slave DMX channels: 5 Standalone programming: DIP switch Settings and DMX addressing: DIP switch DMX compliance: USITT DMX512/1990
    Optics
    Light source: CREE 78 W LED Color temperature: 6000–7000 K CRI (color rendering index): >70 Minimum LED lifetime: 35 000 hours (to >70% luminous output)* *Figure obtained under test conditions
    Construction
    Color: Black (RAL 9005) Housing: Steel and aluminum Protection rating: IP20
    Installation
    Mounting points: Four rubber-mounting grommets, two Ø13 mm holes for rigging clamps Location: Indoor use only, must be fastened to surface or structure Minimum distance to combustible materials: 0.2 m (7.9 in.) Minimum clearance around fans and vents: 0.1 m (4.0 in.) Orientation: Any
    Connections
    AC power in/out: Neutrik PowerCon DMX data in/out: 3-pin and 5-pin locking XLR
    Electrical
    AC power: 100-240 V, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode
    Typical Power and Current
    110 V, 60 Hz: 0.8 A, 87 W, PF 0.986 230 V, 50 Hz: 0.5 A, 86 W, PF 0.909 Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
    Thermal
    Cooling: Forced air (regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Maximum surface temperature, steady state, at 40° C ambient: 50º C (122° F)
    Approvals
    EU Safety: EN 60598-2-1 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61547 US Safety: ANSI/UL 1598 US EMC: 47 CFR Part 15 Class A Canadian Safety: CSA C22.2 No. 250.0 Australia/NZ: C-TICK N4241
    Included Items
    Power cable, 1.5 m (4.9 ft.), without mains plug: Color filter M05, blue 108L w. adaptor: Color filter M05, yellow 603L w. adaptor: Color filter M05, green 206L w. adaptor: Color filter M05, red 308L w. adaptor:
    Accessories
    Filters Color filter M05, green 202L w. adaptor: P/N 62327931 Color filter M05, blue 111L w. adaptor: P/N 62327928 Color filter M05, blue 101L w. adaptor: P/N 62327929 Color filter M05, cyan 401L w. adaptor: P/N 62327930 Color filter M05, yellow 604L w. adaptor: P/N 62327932 Color filter M05, red 301L w. adaptor: P/N 62327933 Color filter M05, pink 312L w. adaptor: P/N 62327934 Color filter M05, purple 502L w. adaptor: P/N 62327936 Color filter M05, green 204L w. adaptor: P/N 62327937 Color filter M05, orange 306L w. adaptor: P/N 62327938 Cables, 16 A, for connection to power in chains Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511 Power connectors Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804 Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805 Installation hardware Half-coupler clamp: P/N 91602005 G-clamp (vertical suspension only): P/N 91602003 Quick-trigger clamp (vertical suspension only): P/N 91602007
    Ordering Information
    RUSH FiberSource 1™ in cardboard box: P/N 90280070