Martin RUSH MH 6 Wash (Free Shipping)

Martin RUSH MH 6 Wash
Manufacturer: Martin
Condition: New
Item #: 90280080
Regular price: $1,500.00
Sale price: $1,500.00
  • Free Shipping
  • Product Description

    Martin RUSH MH 6 Wash
     

    The RUSH MH 6 Wash is an exciting adaption of the hugely popular RUSH PAR 2 RGBW Zoom, using the same LED engine and zoom system, but additionally featuring moving head capability. The RUSH MH 6 Wash offers a fully pre-mixed color system from 12 x 10 W RGBW LEDs with a spectacular 10°–60° zoom. It also offers full electronic dimming, strobe effects and temperature-controlled fan cooling for quiet operation.

    • Bright LED moving head wash light
    • 12 x 10 W RGBW LEDs
    • Single-lens wash with fully premixed color
    Features
    • 12 x 10 W Osram Ostar RGBW LED’s
    • Single-lens wash with fully premixed color
    • 2,000 lumen output
    • 10°–60° zoom
    • 32 pre-built color macros
    • Temperature-controlled cooling system
    • Digital display menu
    • PowerCON in and through
    • 3 and 5-pin DMX options
    Tech Specs
    Physical
    Length: 290 mm (11.4 in.) Width: 189 mm (7.4 in.) Height: 360 mm (14.2 in.) Weight: 7.1 kg (15.7 lbs.)
    Dynamic Effects
    Color mixing: RGBW Color presets: 36 color presets plus full white, ‘color wheel’ effects Electronic dimming: 0 - 100%, four dimming curve options Strobe and pulse effects: Variable speed and action, random strobe Electronic 'shutter' effect: Instant open and blackout Zoom: Motorized Pan: 540° Tilt: 200°
    Control and Programming
    Control options: DMX DMX channels: 14 White balance control: RGB adjustment 16-bit fine control: Dimming, pan and tilt DMX address setting: Control panel with LCD display DMX compliance: USITT DMX512/1990
    Optics
    Light source: 12 x 10 W RGBW Osram Ostar LEDs Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Zoom range: 10° - 60° *Figure obtained under manufacturer's test conditions
    Construction
    Color: Black Housing: High-impact flame-retardant thermoplastic Ingress protection rating: IP20
    Installation
    Mounting points: One quarter?turn bracket for rigging clamp Location: Indoor use only, must be fastened to surface or structure Orientation: Any Minimum distance to illuminated surfaces: 200 mm (8 in.) Minimum distance to combustible materials: 100 mm (4 in.) Minimum clearance around fans and vents: 100 mm (4 in.)
    Connections
    AC power in/thru: Neutrik PowerCon DMX data in/thru: 3-pin and 5-pin locking XLR
    Electrical
    AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch mode Fuse: T 3.15 A Recommended Miniature Circuit Breaker*: Type D *Per IEC 60898/UL489/CSA C22.2 No. 5 Power consumption figures are typical, not maximum. Allow for +/-10% variation.
    Typical Power and Current
    120 V, 60 Hz: 1.3 A, 150 W, PF 0.99 230 V, 50 Hz: 0.7 A, 150 W, PF 0.94 Typical half-cycle RMS inrush current at 240 VAC: 11.3 A Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal
    Cooling: Forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 0° C (32° F)
    Approvals
    EU safety: EN 60598-2-17 (EN605989-1), EN 62471, EN 62493 EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573, UL 8750 US EMC: CFR Title 47 Part 15 Canadian safety: CSA C22.2 No. 166 Australia/NZ: C-TICK N4241 / RCM
    CE ETL C US Intertek C-Tick
    Included Items
    Power input cable, 6 A, 18 AWG, UL, 0.75 mm2, H05VV-F, 1.5 m (4.9 ft.), without mains plug Omega bracket for rigging clamp attachment
    Accessories
    Cables Power input cable, AWG 14, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511 Power connectors Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804 Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805 DMX link DMX termination plug, 3-pin male XLR: P/N 91613017 Installation hardware Half-coupler clamp: P/N 91602005 G-clamp: P/N 91602003 Quick-trigger clamp: P/N 91602007 Safety cable, safe working load 50 kg: P/N 91604003
    Related Items
    RUSH™ Software Uploader 1: P/N 91611399
    Ordering Information
    RUSH MH 6 Wash™ in cardboard box: P/N 90280080