Martin Exterior 410, US Model, Aluminum (Free Shipping)

Martin Exterior 410, US Model, Aluminum
Manufacturer: Martin
Condition: New
Item #: 90545151
Regular price: $4,530.00
Sale price: $4,530.00
  • Free Shipping
  • Product Description

    Martin Exterior 410, US Model, Aluminum
     

    For lighting designs requiring perfect color mixing at the fixture and no color separation, the Exterior 410™ steps in with very powerful pre-mixed LEDs. At 5600 lumens, the Exterior 410 is also extremely bright and uses RGBW color mixing to provide a wide and rich palette of colors.

    The Exterior 400™ Range

    The outdoor installation market now has the best combination of powerful, compact and energy-efficient LED light fixtures. No matter the application - long or short throw, cold or warm white, dynamic or static color - the Exterior 400 Range does it all.

    • Extremely bright fixture with full color mixing
    • Very high efficacy
    • No color separation or shadows due to use of premixed LED
    Features
    • Super even color mixing at the fixture - no color separation
    • Extremely bright (5600 lm)
    • Very low power consumption (max 139 W)
    • Choice of beam angles - 19°, 22°, 36°, 65°
    • Color calibration ensuring uniform colors across fixtures
    • Internal power and control
    • Super rugged IP65 housing
    • Choice of white, black or aluminum housing
    • 0 – 100% intensity control
    Tech Specs
    Physical
    Length: 169 mm (6.7 in.) including cable gland Width: 307 mm (12.1 in.) Height: 401 mm (15.8 in.) Weight: 7.6 kg (16.8 lbs.) including bracket
    Dynamic Effects
    Color mixing: RGBW Red: 0 - 100% Green: 0 - 100% Blue: 0 - 100% White: 0 - 100%
    Control and Programming
    Color control modes: RGB, RGBW, HSI, HSIC Control options: DMX, stand-alone, synchronized (master/slave) DMX channels: 3 or 4 depending on mode DMX address setting: PC with Martin MUM™ software and DABS1™ hardware interface Stand-alone trigger options: Internal timer and/or ambient light level Stand-alone and master/slave programming: PC with Martin MUM™ software and DABS1™ hardware interface 26-bit control (internal): RGB, RGBW, HSI, HSIC Protocol: USITT DMX512-A Receiver: RS-485 Firmware update: Serial upload via DMX link
    Optics
    Light source: Cree MC-E high-power emitters White LED: Neutral white, 5700 - 7000 K Minimum LED lifetime: 50 000 hours (to >70% luminous output)* Very Narrow (no diffuser), Narrow, Medium and Wide beam angles available *Figure obtained under manufacturer's test conditions
    Construction
    Color: Clear anodized, black or white Housing: Anodized aluminum Mounting bracket: 8 mm (0.32 in.) anodized aluminum Front glass: 6 mm (0.24 in.) anti-reflection coated Protection rating: IP65
    Installation
    Orientation: Any Mounting: Flat surface at any angle, pedestal or other suitable support Vertical aiming: 330° Minimum distance to illuminated surfaces: 0.1 m (0.33 ft.)
    Connections
    Power cable entry: IP68 cable gland Power connection: 1.8 m (5.9 ft.) cable tail Data cable entry: IP68 cable gland Data connection: 1.8 m (5.9 ft.) combined input + output cable tail
    Electrical
    AC power: 100-240 V nominal, 50/60 Hz Standby power: 13 W Power supply unit: Integrated, auto-sensing multi-voltage Main fuse: 2.5 AT (slow blow)
    Typical Power and Current
    100 V, 50 Hz: 139 W, 1.4 A, PF 0.990 100 V, 60 Hz: 139 W, 1.4 A, PF 0.989 110 V, 60 Hz: 137 W, 1.3 A, PF 0.988 120 V, 60 Hz: 136 W, 1.2 A, PF 0.986 208 V, 60 Hz: 133 W, 0.7 A, PF 0.932 230 V, 50 Hz: 132 W, 0.7 A, PF 0.925 240 V, 50 Hz: 131 W, 0.7 A, PF 0.886 Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.
    Thermal
    Cooling: Convection Maximum ambient temperature (Ta max.): 45° C (113° F) Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below 0° C (32° F) Maximum surface temperature, steady state, at 40° C ambient: 90° C (194° F) Total heat dissipation (calculated, +/- 10%): 480 BTU/hr.
    Approvals
    EU safety: EN 60598-2-5 (EN 60598-1), IEC/EN 60825-1 EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3 US safety (US model): UL 1598 Canadian safety (US model): CAN/CSA C.22.2 No. 250
    CE ETL C US Intertek
    Included Items
    Adjustable mounting yoke Narrow, Medium and Wide diffusers (supplied separately with product) Hard-wired 1.8 m (5.9 ft.) power and data in/out cable tails without connectors User manual
    Accessories
    Diffuser, Exterior 400 Series, Narrow: P/N 41600122 Diffuser, Exterior 400 Series, Medium: P/N 41600123 Diffuser, Exterior 400 Series, Wide: P/N 41600124 Diffuser, Exterior 400 Series, Narrow, Directional 15°x1°: P/N 41600156 Diffuser, Exterior 400 Series, Medium, Directional 30°x3°: P/N 41600157 Diffuser, Exterior 400 Series, Wide, Directional 60°x1°: P/N 41600158 Diffuser, Exterior 400 Series, Wide, Directional 60°x10°: P/N 41600159 Exterior 200 floor stand: P/N 91611305 Safety eyebolt: P/N 91611239 3-pin male XLR connector, cable-type, IP65: P/N 91611306 3-pin female XLR connector, cable-type, IP65: P/N 91611307
    Related Items
    Martin DABS1™ USB interface box incl. cables: P/N 90758090
    Spare Parts
    2.5 AT main fuse: P/N 05020010
    Ordering Information
    Exterior 410, EU Model, Aluminum: P/N 90545053 Exterior 410, US Model, Aluminum: P/N 90545151 Exterior 410, EU Model, Black: P/N 90545061 Exterior 410, US Model, Black: P/N 90545161 Exterior 410, EU Model, White: P/N 90545071 Exterior 410, US Model, White: P/N 90545171