TECH 21 Trademark 30 - 30w, 1x10 Guitar Combo/DI Amplifier (Free Shipping)

TECH 21 Trademark 30 - 30w, 1x10 Guitar Combo/DI Amplifier
Manufacturer: TECH 21
Condition: New
Item #: TM-30
Regular price: $520.00
Sale price: $329.00
  • Free Shipping
  • Product Description

    Single channel, 1x10, 30 watts. We call this our Direct Recording Combo Amp. We should have called it Yoda, because there isn’t much this diminutive wizard can’t handle. The heart of the crafty Trademark 30 is a modified version of the super flexible SansAmp GT2 pedal design. Construct your tone by selecting amp character, gain structure and speaker type, and then use the drive controls and active three-band EQ to nail your sound. The 30-watt output is plenty loud for practice and monitoring but the balanced XLR and 1/4” outputs bring the big tones of this little combo to the studio mixer or PA system. Bedroom, rehearsal, studio or club, the Trademark 30 will prove it’s a giant amongst compact combos.

    TM-30 ADDITIONAL FEATURES
  • Character section to construct a custom tone in seconds.
  • Professional quality Accutronics® 3-spring reverb.
  • 3-band, active tone controls, boost or cut 12dB.
  • Effect Loop.
  • Headphone output doubles as a 1/4” direct out.
  • Speaker extension output.
  • XLR Direct Output.
  • Weighs just over 14lbs.

    SPECIFICATIONS
  • Model Number TM30
  • Input Impedance 1MOhm
  • Nominal Input Level* -10dBu
  • Optimum Output Load 4 Ohms
  • Power Output 30W
  • Effect Loop Input Impedance 1MOhm
  • Maximum Effect Loop Input* approx. -6dBu
  • Effect Loop Output Impedance 1KOhm
  • Nominal Effect Loop Output* approx. -20dBu
  • Nominal XLR Output* approx. -20dBu
  • Maximum Power Consumption 60W
  • AC Input Power (Factory Set) 110V, 117V, 230V, 240V
  • Cycles 50/60Hz
  • Speaker Special Design Model #2110-T 10", 50W, 4 Ohms
  • Cabinet Dimensions 14.5"l x 8"w x 13.25"h
  • Weight 14lbs
  • Single channel, 1x10, 30 watts. We call this our Direct Recording Combo Amp. We should have called it Yoda, because there isn’t much this diminutive wizard can’t handle. The heart of the crafty Trademark 30 is a modified version of the super flexible SansAmp GT2 pedal design. Construct your tone by selecting amp character, gain structure and speaker type, and then use the drive controls and active three-band EQ to nail your sound. The 30-watt output is plenty loud for practice and monitoring but the balanced XLR and 1/4” outputs bring the big tones of this little combo to the studio mixer or PA system. Bedroom, rehearsal, studio or club, the Trademark 30 will prove it’s a giant amongst compact combos.

    TM-30 ADDITIONAL FEATURES
  • Character section to construct a custom tone in seconds.
  • Professional quality Accutronics® 3-spring reverb.
  • 3-band, active tone controls, boost or cut 12dB.
  • Effect Loop.
  • Headphone output doubles as a 1/4” direct out.
  • Speaker extension output.
  • XLR Direct Output.
  • Weighs just over 14lbs.

    SPECIFICATIONS
  • Model Number TM30
  • Input Impedance 1MOhm
  • Nominal Input Level* -10dBu
  • Optimum Output Load 4 Ohms
  • Power Output 30W
  • Effect Loop Input Impedance 1MOhm
  • Maximum Effect Loop Input* approx. -6dBu
  • Effect Loop Output Impedance 1KOhm
  • Nominal Effect Loop Output* approx. -20dBu
  • Nominal XLR Output* approx. -20dBu
  • Maximum Power Consumption 60W
  • AC Input Power (Factory Set) 110V, 117V, 230V, 240V
  • Cycles 50/60Hz
  • Speaker Special Design Model #2110-T 10", 50W, 4 Ohms
  • Cabinet Dimensions 14.5"l x 8"w x 13.25"h
  • Weight 14lbs
  • Measured using a -10dB 400Hz test signal with all amp controls flat, no Reverb or Boost. Actual levels will vary with your settings.