YORKVILLE AP6020 Power Amp, 2 x 1300 Watts @ 4 Ohms, 3RU

YORKVILLE AP6020 Power Amp, 2 x 1300 Watts @ 4 Ohms, 3RU
The most powerful Yorkville amplifier ever built. The three rack space AP6020 and AP6040 solve the problem of not having cost effective and practically configured power for subwoofers. With better than 2000W per channel (AP6020 @ 2 Ohms, AP6040 @ 4 Ohms), the AP6020 & AP6040 put plenty of clean power just where you need it. The incorporated ‘soft turn-on’ circuit eliminates nuisance breaker-tripping on power-up while internal protection protects against DC output, thermal overload and inappropriate loads. The user defeatable limiter also prevents audible clipping.

Features
  • Designed for rock solid performance right down to and below their lowest impedance ratings
  • Will easily drive reactive phase shifted loads
  • Advanced protection schemes including DC current, load, thermal and breaker protection
  • User-defeatable peak limiter that is transparent below clipping levels
  • Soft turn-on' circuit eliminates damage to attached components and prevents nuisance breaker-tripping
  • Computer-optimized Silentfan front-to-back heat dissipation system
  • Long-life, faceplate-mounted, user serviceable, air intake filters
  • Front panel Power, Protect, Activity and Clip LED's
  • Speakon and binding post outputs
  • Balanced XLR & 1/4" TRS inputs
  • Impedance Mode switch (AP1020 & AP2020)
  • Sturdy all-steel construction
  • Baked-on, black finish
  • Reinforced mounting ears
  • User defeatable limiter circuit
  • An amp for all needs - Wattage ratings ranging from 160 watts per channel @ 8 ohms (AP1020) to 4000 watts bridged @ 4 ohms (AP6020)


  • Specifications
  • Amplifier class: H
  • Continuous Average Power @ 8 Ohms BCD (Watts): 800 (x2)
  • Continuous Average Power @ 4 Ohms BCD (Watts): 1300 (x2)
  • Continuous Average Power @ 2 Ohms BCD (Watts): 2000 (x2)
  • Continuous Average Power Bridged BCD (Watts): 4000 @ 4 Ohms
  • Burst Average Power @ 8 Ohms BCD (Watts): 1200 (x2)
  • Burst Average Power @ 4 Ohms BCD (Watts): 2175 (x2)
  • Burst Average Power @ 2 Ohms BCD (Watts): 3625 (x2)
  • Burst Average Power Bridged BCD (Watts): 7200 @ 4 Ohms
  • Frequency Response (Hz, +/- 1dB): 20-20,000
  • Hum and Noise (un / Aweighted -dB): -103 / -106
  • THD -1kHz- 4 OHMS: 0.01%
  • THD - 20Hz-20kHz, 4 Ohms: less than 0.1%
  • Slew Rate (V/uS): 25
  • Slew Rate Bridged (V/uS): 50
  • Damping Factor (30 Hz - 400 Hz @ 8 Ohms): 600
  • Crosstalk (1kHz / 20Hz-20kHz): -75 / -60 dB
  • Input Impedance - Bal/Unbal (Ohms): 20,000/10,000
  • Input Sensitivity (Vrms) For Full Power Out: 1.4 V
  • Max Voltage Gain (dB): 36
  • CMRR @ 60Hz (min/typ): 48/56 dB
  • Stereo / Mono / Bridge (S/M/B): S/M/B
  • Protection: DC,Load,Thermal
  • Limiter: Peak
  • High Pass Filter: 40Hz, 12dB Octave
  • Cooling: Dual Internal Fans
  • Cooling Path: Front to Rear
  • Fan Filter: 2x User Serviceable
  • Inputs - XLR: 2
  • Inputs - 1/4" Jacks: 2
  • Outputs - Speakon 4-pin: 2
  • Outputs - Binding Post: 2
  • Power Consumption (typ/max): 1800/3000 Watts
  • Rack Spaces: 3
  • Transformer Type: Toroidal
  • Exterior Finish: Baked, Black Painted
  • Dimensions (DWH /D fm ears, inches): 19 x 18.5 x 5.25 x 17.6
  • Dimensions (DWH /D fm ears, cm): 48.3 x 47 x 13.3 x 44.7
  • Weight (lbs / kg): 67 / 30.4