YORKVILLE EP210 Stereo 1/2 WAY Processor 1/4" IO

YORKVILLE EP210 Stereo 1/2 WAY Processor 1/4" IO
Every élite enclosure can be used with an optional, dedicated stereo processor which is designed to optimize the performance of that specific cabinet. The 19" rack-mountable processors interface between the output of the mixer and the input of the power amplifier(s) to provide both pre-equalization and crossover facilities, plus enhanced subsonic protection and hum-rejection. Variable crossover on the switchable Subwoofer OutputSubwoofer outputs features user variable 90Hz to 150Hz crossover frequency controls. Bass frequencies destined for the full-range enclosure's woofer, which are more effectively reproduced by the subwoofer are rolled off. A two or three way system can be achieved by adding a subwoofer to your existing élite system. It also features push buttons for live/playback mode, bi-amp/full range mode and subwoofer in/out. All processors feature balanced 1/4" TRS (XLR optional on EP152 and EP2152) inputs and outputs and can be used with all Yorkville subwoofers – they are even compatible with our competitor's subs! All feature a signal-to-noise ratio of better than 97dB and a max output of 8Vrms, 20dBm at 1kHz.
Features

  • Full Range with subwoofer modes
  • 1?4” inputs and outputs
  • subwoofer crossover frequency control
  • live / program music contour switch
  • APPSTM Subwoofer time alignment circuit (5ms delay) - for E210



  • Specifications

  • System Type: Two-Way
  • Active or Passive: Passive
  • Program Power (Watts): 600
  • Biampable: No
  • Nominal Impedance (Ohms): 4
  • Sensitivity (dB @1Watt/1m): 102
  • Max SPL (dB): 128
  • Frequency Response (Hz +/- 3db): 55 - 26k
  • Crossover Frequency (Hz): 1900
  • Driver Configuration: 2 x 10 inch / 1 inch
  • HF Driver(s): 1 inch throat (1.5 inch Polyester Diaphragm)
  • HF Horn: Rotatable ABS Waveguide
  • HF Dispersion (°H x °V): 80 x 50 (Rotatable)
  • HF Protection: PTC™
  • LF Driver(s): 2 x 10 inch Neodymium
  • Inputs - 1/4" Jacks: 2
  • Inputs - Speakon 4-pin: 2
  • Flying Hardware: 3/8-inch x 9 (All Corners)
  • Bar Handles: 2
  • Pole Mount Adapter (1 3/8"-3.5cm): Yes
  • Enclosure Materials 15mm (5/8inch) 11-ply: Russian Birch
  • Grille: Perforated Metal
  • Covering / Finish: Black Ozite (Carpet)
  • Optional Covering / Finishes: Black Ultrathane Paint (E210B)
  • Processor (optional): EP210
  • Dimensions (DWH xbackW, inches): 12 x 14 x 34 x 6.5
  • Dimensions (DWH xbackW, cm): 31 x 36 x 86 x 17
  • Weight (lbs/kg): 50.3 / 22.8