Engineered for the serious pro audio user, the U215 is among the most advanced, most versatile and most efficient high-powered portable P.A. boxes available on the market today. The U215 is a radical loudspeaker cabinet design utilizing the patented Unity™ Summation Aperture Horn Technology invented by loudspeaker designer Tom Danley.
The U215 provides remarkably even high/mid frequency distribution from its 60° x 60° horn assembly. The combination of that conical, constant directivity horn, dual 15-inch high powered woofers and our unending attention to details, right down to the ideal trapezoidal cabinet design, has yielded an extremely versatile speaker. The U215's Unity™ horn combines a single 1-inch-throat (1.75" diaphragm) compression driver with three 5-inch ceramic magnet midrange drivers firing through time-aligned slots in the horn-wall. This seamlessly blends the mid and high frequencies while providing exceptional power capacity and clarity from 300Hz to 20kHz.FeaturesUnique 60° x 60° Unity™ horn assembly combines mid and high frequency drivers on conical horn.
All four component drivers mounted in a Unity™ horn are mechanically time-aligned to measure and act like a single point source.
No self-interference between individual loudspeaker components.
Biamp mode switch
Ten rigging points allow for all possible mounting and flying configurations.
15mm 11-ply birch cabinet construction.
Two-year unconditional warranty
U215 - Black Ozite (Carpet) Finish
U215B - Black Ultrathane (Painted) Finish
System Type: Three-Way
Active or Passive: Passive
Program Power (Watts): 1800 Watts (3600 Watt Peak)
Nominal Impedance: (Ohms) 4
Sensitivity (dB @1Watt/1m): 98
Max SPL (dB): 134dB Peak (130 Continuous)
Frequency Response: (Hz +/- 3dB) 45 - 20k
Crossover Frequency: (Hz) 300 / 1250
Driver Configuration: 2x15-inch / 3x5-inch / 1.75-inch
HF Driver(s): 1.75 inch polyester
HF Impedance :(Ohms) 8
HF Horn: Conical Unity™ horn (1 inch throat)
HF Dispersion: (°H x °V) 60 x 60
HF Protection: PTC™
MF Driver(s): 3 x 5 inch ceramic 1 inch voicecoil
MF Horn: Conical Unity™ horn
MF Dispersion: (°H x °V) 60 x 60
LF Driver(s): 2x15-inch w/ 3-inch voicecoil
LF Impedance :(Ohms) 4
Inputs : 1/4" Jacks 2
Inputs : Speakon 4-pin 2
Flying Hardware: 3/8inch x 9 (all corners 1 pullback)
Bar Handles: 2 Side
Enclosure Materials: 15mm 11-ply Birch
Grille: Perforated Metal
Covering / Finish: Black Ozite (Carpet)
Optional Covering / Finishes: Black Ultrathane Paint (U215B)
Dimensions: (DWH xbackW, inches) 16.25 x 19.25 x 50 x 9.5
Dimensions:(DWH xbackW, cm) 42 x 49 x 127 x 24
Weight: (lbs/kg) 113.8 / 51.6