The U215B provides remarkably even high/mid frequency distribution from its 60º x 60º horn assembly. The combination of that conical, constant directivity horn, dual 15-inch Neodymium-magnet woofers has yielded an extremely versatile speaker. The U215B’s Unity™ horn combines a single 1-inch-throat (1.75" diaphragm) compression driver with three 5-inch ceramic magnet midrange drivers firing through time-aligned slots in the horn-wall. This seamlessly blends the mid and high frequencies while providing exceptional power capacity and clarity from 300Hz to 20kHz. A pair of advanced, high-efficiency, 800-Watt fifteens with ultra lightweight Neodymium magnets provide clean, powerful, extended lows to complete the package.
The U215 comes with a high-definition passive crossover featuring our exclusive PTC™ non-interruptive horn protection. However it can be easily bi-amplified thanks to a switch on the rear jackplate, and with the optional UP215 Unity™ processor, designed specifically to optimize the sonic characteristics of the U215B. The UP215 has been developed to ensure trouble free, “plug-and-play” operation whether the U215 is being run in passive or active bi-amped mode. It further offers a subwoofer output.
FeaturesUnique 60º x 60º Unity™ horn assembly combines mid and high frequency drivers on conical horn.
All four component drivers mounted in a Unity™ horn are mechanically time-aligned to measure and act like a single point source.
No self-interference between individual loudspeaker components.
Two 15-inch high power lightweight (10lbs/4.5kgs) Neodymium woofers with three-inch voicecoil.
Biamp mode switch
Ten rigging points allow for all possible mounting and flying configurations.
15mm 11-ply birch cabinet construction.
Two-year unconditional warranty
U215 - Black Ozite (Carpet) Finish
U215B - Black Ultrathane (Painted) Finish
Unity™ Series Overiew
System Type Three-Way
Active or Passive Passive
Program Power (Watts) 1600 / 200
Nominal Impedance (Ohms) 4
Sensitivity (dB @1Watt/1m) 98
Max SPL (dB) 130
Frequency Response (Hz +/- 3db) 45 - 20k
Crossover Frequency (Hz) 300 / 1250
Driver Configuration 2x15 inch / 3x5 inch / 1.75 inch
HF Driver(s) 1.75 inch polyester
HF Horn Conical Unity™ horn (1 inch throat)
HF Dispersion (°H x °V) 60 x 60
HF Protection PTC™
MF Driver(s) 3 x 5 inch ceramic 1 inch voicecoil
MF Impedance (Ohms) 4
MF Horn Conical Unity™ horn
MF Dispersion (°H x °V) 60 x 60
LF Driver(s) 2x15 inch neodymium / 3 inch voicecoil
LF Program Power(Watts) 1600
LF Impedance(Ohms) 4
Inputs - 1/4" Jacks 2
Inputs - Speakon 4-pin 2
Flying Hardware 3/8inch x 10 (all corners 2 pullback)
Bar Handles 2 Side
Enclosure Materials 15mm 11-ply Birch
Grille Perforated Metal
Covering / Finish Black Ozite (Carpet)
Optional Covering / Finishes Black Ultrathane Paint (U215B)
Dimensions (DWH xbackW, inches) 16.25 x 19.25 x 50 x 9.5
Dimensions (DWH xbackW, cm) 42 x 49 x 127 x 24
Weight (lbs/kg) 95 / 41